Aerodynamic External GNSS Antenna

99,96 €

  • Low-drag dual-band external GNSS antenna for reliable reception on gliders with a carbon fibre (CFRP) fuselage, which strongly shields GNSS signals inside
  • Mounts on the top of the fuselage using pre-applied double-sided 3M VHB tape
  • The antenna cable is routed into the fuselage through a 3,3 mm hole and connected to the LARUS Sensor Box via an adapter board and a 5.0 m cable
  • The CFRP fuselage acts as the antenna’s ground plane, so no additional ground plane is required
  • Housing 3D-printed from UV-resistant polyamide (PA)
  • Surface can be sanded and painted

Delivery time: 5-7 Werktage / Business Days

In stock (can be backordered)

SKU: LARUS-GNSS-A-AN Category:

External Antenna for Optimal GNSS Reception 

As an alternative to the Stefly GNSS canopy antenna, the rear GNSS antenna for LARUS Competition can also be mounted externally on aircraft with a carbon fibre (CFRP) fuselage. With no shielding CFRP laminate between the active antenna and the satellites, reception is usually significantly better than with an antenna mounted inside the fuselage. The teardrop-shaped fairing is designed for minimal drag.

Routing the cable requires only a 3 mm hole in the upper fuselage shell. The antenna is attached with 3M VHB tape, which can be removed again if needed.

Cookie Consent with Real Cookie Banner